How To Use Crushball Dispenser?
Crush Ball Filters Tips
Our easy step by step guide will make it seem as easy as lemon squeezy.
Load The Crush ball from the top of the dispenser.
Step 1
Insert the cigarette in the bottom left hand side hole
Step 2
Whilst holding the cigarette pull the lever down to make a hole inside the filter.
Step 3
Whilst holding the cigarette in place use the filter lever to load the cigarette
Step 4
Still holding the cigarette in place as before use the same lever to make a hole to slowly push the crush ball capsule inside the hole previously made. Whilst pushing it inside the filter please do this gently to avoid the capsule popping.
Please don't take out the cigarette at any stage until the crush ball has been put inside the filter.
Use the attachment found at the bottom of the dispenser and place it in the bigger cigarette filter hole next to the attachment to use for slim cigarettes.
Inserting crushball using the stick
Step 1
Make A hole with the stick provided in the middle of the filter.
Step 2
Push the stick half way through the filter and move the slowly in circle rotation to make the hole bigger.
Step 3
Pop the crush ball capsule inside the filter, use the flat side of the stick to push the capsule slowly inside the filter.
Step 4
Pop the crush ball inside
You can put two capsules inside the filter just make sure the first hole you make goes a little past the half way so two capsules can fit.
